Sealant For Freeze Plugs

Home > Sealants / Sealant For Freeze Plugs
Welcome to the Industrial and Scientific Tool!

The best site about Sealant For Freeze Plugs

K-Seal ST5501 Multi Purpose One Step Permanent Coolant Leak Repair
List Price: $14.99 Price: $7.67 You Save: $7.32 (49%)
Buy Now >>
  • No draining or flushing
  • Just shake, pour and go
  • Fixes cracks and leaks in radiator, head gasket, freeze plugs, cylinder heads, heater core, water pump casing and engine blocks
New Pig PTY237 Plug-N-Seal No-Freeze Patching Paste, 0.75 lbs Container, 3-1/4" Diameter x 1-3/4" Height, Gray/Green
Price: $19.33
Buy Now >>
  • Temporarily stops leaks from 2 minutes up to 2 hours
  • No preparation needed, even on dirty or rusty surfaces
  • Excellent chemical resistance makes it ideal for flammable or hazardous leaks
Permatex 80003 Form-A-Gasket #1 Sealant, 11 oz.
List Price: $10.05 Price: $6.40 You Save: $3.65 (36%)
Buy Now >>
  • Temperature range -65F to 400F
  • Resists common shop fluids and fuels
  • Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Permatex 80007 Form-A-Gasket #1 Sealant, 1.5 oz.
List Price: $25.14 Price: $1.68 You Save: $23.46 (93%)
Buy Now >>
  • Temperature range -65F to 400F
  • Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
  • Fast-drying, hard-setting sealant
Jet-Lube Marine-Moly Molybdenum Disulfide Paste, 1 lbs Plug Top, Black
List Price: $19.83 Price: $15.08 You Save: $4.75 (24%)
Buy Now >>
  • Specially formulated Molybdenum Disulfide maine lubricating paste that provides a low friction shield by "plating" to metal surfaces to reduce bearing temperatures
  • Service rating: -300 to 750 degrees F, 300,000 psi film strength
  • Protects working parts, prevents galling and heat freeze, this paste is very tenacious and can be applied by brush to hot surfaces without running or dripping off

Sealant For Freeze Plugs - Best News

Cold weather survival guide: What you need to know


  • • Dress in layers. Several thin layers are warmer than one heavy layer. The goal is to keep the body warm and minimize sweating and avoid shivering.

    • Health conditions such as diabetes and heart disease can significantly decrease a person's ability to exercise outdoors in the cold.

    • Cover your head. Heat loss from the head and neck may be as much as 50 percent of the total heat being lost by your body.

    • Cover your mouth. To warm the air before you breathe it, use a scarf or mask. Do this especially if breathing cold air causes angina (chest pain) or you are prone to upper respiratory problems.

    • Stay dry. Wet or damp clothing, whether from perspiration or precipitation, significantly increases heat loss.

    • Stay hydrated. Dehydration reduces your body's ability to regulate body heat and increases the risk of frostbite. Avoid consuming alcohol or beverages containing caffeine, because these items are dehydrating.

  • Source: NJ.com

    Sealant For Freeze Plugs - Recent Articles

    Replacing a Freeze Plug - autoMedia


  • A freeze or expansion plug is a small, metal, circular plug that lives in various places on an engine block. These plugs have a valuable function and an equally interesting origin. An engine block starts life as molten metal. In order to form an engine block, this metal is poured into a mold. When the metal cools off from a liquid to a solid, the engine block is born. As the mold is no longer needed, it is knocked away from the engine block. As most modern engines are liquid cooled, part of this mold also forms the cooling passages inside the engine and must be knocked away as well. The cooling jacket mold material is removed through the holes now filled by the freeze plugs. Along with filling holes, the freeze plugs have another function. Water expands when frozen. Metal on the other hand does not like to expand very much. If for some reason the liquid coolant inside the engine block freezes and expands, the freeze plug is designed to pop out of the engine block to allow coolant to expand...
  • Read more...

    Source: Replacing a Freeze Plug - autoMedia

    Sealant For Freeze Plugs
    Best books
    How to Rebuild and Restore Farm Tractor Engines How to Rebuild and Restore Farm Tractor Engines

    Creator: Spencer Yost | Technology & Engineering - 2000 1 Freeze plug removal and installation is a task every restorer will have to do eventually. Remove the old freeze plug by ... A little high-temperature sealant around the edges of the landing will prevent leaks. 3 Then expand the plug by driving a ... Publisher: Voyageur Press

    How to Rebuild the Big-Block Chevrolet How to Rebuild the Big-Block Chevrolet

    Creator: Tony Huntimer | Transportation - 2009 Carefully apply a thin coat of Permatex Form-A-Gasket Number-1 Sealant around the outside edge of the freeze plugs before installing them. Find a socket in your toolbox that has an outside diameter about 1/8 inch smaller than the inside ... Publisher: CarTech Inc

    Rebuilding Gen V/Gen VI Big Block Chevy Engines, How to Rebuild Generation V 1991-1995 and Generation VI (1996-Present) Engines to Stock Specifications. Rebuilding Gen V/Gen VI Big Block Chevy Engines, How to Rebuild Generation V 1991-1995 and Generation VI (1996-Present) Engines to Stock Specifications.

    Creator: Mike Mavrigian | Transportation - 2001-01-01 If you don't plan to use these holes, plug them using a pair of 3/8" pipe plugs, sealed with a Teflon thread sealer. ... Just remember that if you ask for "big- block Chevy" freeze plugs, chances are good that the store will hand you a set of 1 3/4"  ... Publisher: Penguin

    How to Build Classic Hot Rod V-8 Engines How to Build Classic Hot Rod V-8 Engines

    Creator: George McNicholl | Transportation - 2007-01 After the engine block has been painted, install the freeze plugs using Permatex aviation form-a-gasket. Install the oil gallery line plugs and water jacket drain plugs using pipe thread sealant. The most common type of freeze plug is the ... Publisher: MotorBooks International

    Collector Car Restoration Bible, Practical Techniques for Professional Results Collector Car Restoration Bible, Practical Techniques for Professional Results

    Creator: Matt Joseph | Transportation - 2005-10-14 Some of them are very hard to get at when an engine is in a car, so install them with sealant or Loctite and install them carefully. The bores ... As a point of interest, core plugs are sometimes called "Welch" plugs and occasionally "freeze" plugs. Publisher: Krause Publications